Wood is a natural material with both advantages and disadvantages

It's common sense to maintain construction wood to extend its lifespan and help maintain new color. Construction wood should also be moisture-proof to ensure that it can be used normally. So how do wood processing plants do wood maintenance and moisture protection, and what to pay attention to, let me tell you!

Do not let it be exposed to the sun for a long time, avoid direct sunlight and rain soaking.

Regularly clean the wood surface to remove small sand and dust from its surface and prevent friction from damaging the floor. When cleaning, choose a neutral special detergent, and do not directly wash with water when cleaning.

Regularly apply a layer of wax on the surface of construction wood, and apply a layer of wax on the surface every two months, which can not only keep the surface of the product bright, but also protect the wood.

When the house is dry, you can sprinkle some water appropriately. During the wet season, open the windows regularly every day to breathe in the excess moisture and prevent the wood from deforming, rotting, etc.

You can buy some special moisture-proof and dehumidification absorbing boxes, dehumidification bags, activated carbon and other dry items in the supermarket, and put them near or in the corner of the wood after purchasing, which is conducive to absorbing moisture. It is recommended that when the moisture-proof and dehumidifying box is used, after the dehumidification bag is used for a period of time, the material in the box or bag can be taken out, and some bulk desiccant such as lime can be put in to save resources and maintain the moisture absorption effect.

Wood is a natural material with both advantages and disadvantages. In the process of processing and utilization, wood processing plants give full play to their advantages and change their shortcomings. Inferior material is good material, small use is big use. According to different technical requirements and various characteristics of wood, improve the use value, continuously expand and seek new comprehensive utilization methods of wood.

Under the premise of expanding the utilization of forest resources and saving wood, wood processing factories have formulated various technical standards. For example, if a match factory reduced the length of matchsticks, it could save tens of thousands of cubic meters of wood every year.

On the contrary, the technical standards are too high, such as a little bend, scars, edges and points, so the utilization rate of vehicle materials is only 30% of logs; furniture materials account for 40%. The second is to promote the continuous improvement of the management level of the forest industry to ensure product quality requirements.

Wood is made up of countless cells that vary in shape and size. In addition, the nature of wood is very large due to the constraints of natural growing conditions. Wood is different from steel. It is much lighter than ordinary steel, but compared with ordinary steel, its unit weight strength is greater than that of steel; wood has low heat transfer performance, dry wood does not conduct electricity, and thermal expansion and cold shrinkage are small. Suitable for building materials and furniture manufacturing. Wood has excellent resonance properties and is a good material for making musical instruments.

Generally speaking, wood is easy to stain and paint. Various wood paints perform differently due to differences in the thickness of the structure. Such as camphor wood, the color wood material is fine, the paint performance is very good, and the color is also very beautiful. Other woods have natural colors and beautiful patterns that work well with clear paint. The fir material is thick and dull after painting, so it is not suitable for clear paint. Some woods contain more resin, which hinders the paint and tends to spot or peel the paint film. These features can be used in furniture or joinery to enhance the use value and decorative quality of the wood.

Wood is easily broken and decomposed. Using this property, wood can be broken, glued, and shaped. Or treated with chemical agents, or pulped by mechanical methods, used for papermaking or production of cardboard, fiberboard, chemical fibers, etc.; various chemical raw materials can also be made by hydrolysis or thermal decomposition.